Bootsausstattung Kähne – Bootsausstattungen und Textilien

KARO stepped | Artificial leather for effective wall coverings and upholstery

The combination of synthetic leather, an intermediate layer made of PUR foam and the backing fleece is quilted by KARO stepped and double quilted. The check size is approx. 3 cm x 3 cm and runs diagonally.

The KARO stepped artificial leather is used as wall cladding or as upholstery in interior areas in boat and yacht equipment, in caravan and vehicle construction as well as in the home.

We recommend the solvent-free UNI adhesive 140 for gluing.
You can create templates in advance for areas that are difficult to access. Our stencil film is ideally suited for this.

The following colors are also available on request:

color 03

Characteristics

• UV-stable: grade 5
• Rubbing fastness: grade 4-5
• Abrasion cycles: > 100.000
• Antibacterial
• Phthalate free

Areas of application

Boat, yacht and shipbuilding, caravan and vehicle equipment.

Composition

• Upper material: 100% polyurethane
• Base material PUR foam with fleece
• Weight / m² approx. 660 g

Dimensions

• Total thickness: approx. 4-5 mm
• Width of goods: approx. 140 cm
• Delivery: from 1 running meter
• Roll length: approx. 30 m

Cleaning

Use light soapy water, rinse with clean water, dry with a cloth. Do not use organic solvents.

Processing

The material can be sewn, glued or stapled.

When gluing: Quilted KARO generously cut to size to match the surface. Then apply the solvent-free UNI-Glue 140, about 2-3 cm back from the edges, to the surfaces to be glued in stages. Allow the adhesive to flash off a little – observe the data sheet (supplied). After a given time, quilted KARO, also in stages, place in the still half-damp adhesive bed, correct if necessary and then press firmly. Cut the edges, apply a little glue, let it flash off briefly, glue on the PVC mounting rails and insert the KARO quilted.

KARO stepped indoor color variants

KARO stepped indoors with rear view

KARO stepped indoor application example