Koralle-Plus – Special Price-

The upholstered, insulating wall and ceiling paneling

KORALLE-Plus is the wall and ceiling paneling in a modern, attractive look. The textured synthetic leather and insulating foam make bumps almost invisible. The upper is waterproof, abrasion resistant and durable. The soft approx. 4 mm thick middle layer of foam serves as insulation and for bridging uneven surfaces. The back is provided with a Charmeuseabdeckung, on the one hand causes a higher strength and on the other hand, the carrier material for the adhesive.
For bonding, we recommend our solvent-free UNI glue 140.
For hard-to-reach areas, you can create templates in advance. In addition, our stencil film is ideally suited.

20,00 €/m²

Breite: ca. 140 cm Geliefert wird ab 1 lfm.
  • 7752 K beige-marmor, 140 cm breit
Auf den Merkzettel
Auf den Merkzettel
SKU: N/A Category:



  • Lightfast grade 6
  • Flame retardant MVSS 302
  • Sea water resistant
  • Abrasion
  • Easy care


  • 89% PVC, 11% polyester
  • PUR foam – Charmeuse (PES)
  • Total weight / m² 720 g


  • Total thickness: approx. 4 – 5 mm
  • Product width: approx. 140 cm
  • Roll length: approx. 25 m


For light soiling, we recommend cleaning with a soft cloth and soapy water. Never use aggressive chemical cleaners or abrasives.


KORALLE-Plus generously cut the surfaces accordingly. Afterwards, place the solvent-free UNI glue 140, about 2-3 cm from the edges, on the surfaces to be covered in stages. Let the adhesive air out a bit – pay attention to the data sheet (supplied). After a while KORALLE-Plus, also in stages, insert into the still semi-moist adhesive bed, correct if necessary and then press firmly. Cut edges, apply some glue, let it dry briefly, stick on the mounting rails and insert KORALLE-Plus.

Areas of application

Boat, yacht and shipbuilding, home and leisure, caravan and vehicle construction.